- startseite /
- guides /
- admin commands for risk of rain 2 en
Guides
Kategorie A-Z
Gameserver
Risk of rain 2
top10
Wiki
Admin Commands for Risk of Rain 2
Rent your own server for Risk of Rain 2 now in Nitrado
Open the Command Console
The console can be opened with the keystroke combination “CTRL” + “Alt” + “`” on the server. The `’ key is normally found on the keyboard to the left of the 1′ and above the Tab’ key.
List of Commands
| Command | Description | Example |
|---|---|---|
| aim_stick_assist_max_delta | Sets the maximum amount for the tracking of the aim. Default 1.57 | aim_stick_assist_max_delta 5 |
| aim_stick_assist_max_input_help | Adds magnitude to the target on the scale. Value between 0 and 1. Default 0.2 | aim_stick_assist_max_input_help 0.5 |
| aim_stick_assist_max_size | It will set the maximum size of the aiming assistant that extends over your aiming scope. Default 3 | aim_stick_assist_max_size |
| aim_stick_assist_max_slowdown_scale | Adjusts the sensitivity scales when dragging over enemies. Default 0.4 | aim_stick_assist_max_slowdown_scale 0.8 |
| aim_stick_assist_min_delta | It will set the minimum amount at which the aiming assistant can follow. Default 0 | aim_stick_assist_min_delta 0.1 |
| aim_stick_assist_min_size | Sets the minimum size of the aiming assistant that extends over its grid. Defaul1 1 | aim_stick_assist_min_size .8 |
| aim_stick_assist_min_slowdown_scale | Adjusts its sensitivity scales when dragging over enemies. Default 1 | aim_stick_assist_min_slowdown_scale 2 |
| aim_stick_dual_zone_slope | The slope number for the dual stick zone. Default 0.4 | aim_stick_dual_zone_slope |
| aim_stick_dual_zone_threshold | The threshold limit of the dual stick zone. Default 0.9 | aim_stick_dual_zone_threshold 0.8 |
| aim_stick_exponent | The exponent while aiming from the stick input. Default 1 | aim_stick_exponent 2 |
| aim_stick_global_scale | The global sensitivity scale for aiming with the stick. Default 1 | aim_stick_global_scale 1.5 |
| aim_stick_smoothing | The number of smoothing to aim with the stick. Default 0.05 | aim_stick_smoothing |
| anisotropic_filtering = Disable/Enable | Activate or deactivate anisotropic filtering. | anisotropic_filtering Enable |
| audio_focused_only | Audio muting while focusing on the target. Default 0 | audio_focused_only 1 |
| auto_simulate_physics | This is a toggle command used to disable or enable the physics auto-simulator. Default 1 | auto_simulate_physics 0 |
| ban_steam | This command is used to ban the ID of a specific player on the server. | ban_steam |
| body_generate_portraits | This console command will generate portraits for all bodies that are using the default.
Danger, it may crash the game. |
body_generate_portraits |
| body_list | Lists all character bodies. | body_list |
| chat_max_messages | Displays the maximum number of chat messages. Default 30 | chat_max_messages 15 |
| cheats | Activate cheats. | cheats |
| clear | Cleans the console contents | clear |
| client_set_players | Used to set or add network players for all local players.
It can only be used in debug mode. |
client_set_players |
| connect | Connects you to a server | connect XXX.XXX.XXX.XXX:12345 |
| connect_steamworks_p2p | Allows you to connect to servers while using Steamworks P2P. | connect_steamworks_p2p |
| console_enabled | Allows you to activate the command console. | console_enabled 0 |
| corpses_disposal | This will enable the corpse removal mode that allows you to choose between Hard and OutOfSight. Default OutOfSight. | corpses_disposal Hard |
| corpses_max | Maximum number of corpses in the field of view. | corpses_max 20 |
| create_corrupted_profiles | Creates corrupted user profiles. | create_corrupted_profiles |
| cvarlist | It will list all con and convars commands. | cvarlist |
| debug_aim_assist_visual_coefficient = 2 | This command is used to debug visuals. | debug_aim_assist_visual_coefficient = 2 |
| director_combat_disable | This console command will disable all combat directors. | director_combat_disable |
| disconnect | Disconnects you from the current server. | disconnect |
| dump_network_ids | Lists the network identifiers of all objects in the game that are currently networked. | dump_network_ids |
| dump_projectile_map | Show the map between indexes and projectile premades. | dump_projectile_map |
| ea_message_skip | Omit early access notification. | ea_message_skip |
| echo | This console command helps you to echo the text given in the console. | echo |
| enable_damage_numbers | This command will display the damage and healing numbers. 1 Enable 2 Disable | enable_damage_numbers |
| exec | This console command is used to execute a folder named configuration. | exec |
| export_controller_maps | This command is used to list all the player’s rewired controller maps. | export_controller_maps |
| export_default_controller_maps | This command will list all the default rewired controller maps. | export_default_controller_maps |
| find | This command is used to find all concommands and convares with their unique substring. | find |
| fps_max | This command sets the FPS limit on your server. | fps_max |
| gamemode | This console command is used to select the game mode for the next run. | gamemode |
| gamma | Gamma reinforcement, de -inf to inf. Default 0 | gamma 0.05 |
| help | You can display the command or convares help text by executing this console command. | help |
| host | This console command is used to host a server. | host |
| hud_enable | Used to deactivate or activate the HUD. | hud_enable |
| hud_scale | This command is used to scale the HUD elements in the game. Default 100 | hud_scale 80 |
| kick_steam | This command will kick the player with a specific steam ID from the current server. | kick_steam 1234569874563214 |
| language | This console command is used to select the language to be displayed. | language en |
| language_generate_tokens | This command will generate the default tokens that are inserted into a JSON language file. | language_generate_tokens |
| language_reload | This command helps you to reload the current language. | language_reload |
| master_texture_limit | This command is used to adjust the texture quality. Default 0
Values 0, 1= half, 2=quarter, 4= 1/8, etc. |
master_texture_limit 2 |
| max_messages | Maximum number of messages stored in the console log. | max_messages 30 |
| net_loglevel | Expansion of the network record. | net_loglevel |
| net_p2p_debug_transport | This console command is used to print all P2P transfer information on the console. | net_p2p_debug_transport |
| net_p2p_log_messages | This command will allow logging of network messages. | net_p2p_log_messages |
| pause | This command allows you to pause or resume the game. | pause |
| ping | This console command is used to display the ping status of the current server. | ping |
| pp_ao | Enables or disables post-processing of Ambient Occlusion in Screen Space. | pp_ao 1 |
| pp_bloom | This command activates Bloom post-processing.
0 Disabled, 1 Enabled |
pp_bloom 1 |
| pp_motionblur | This is a command used to enable or disable motion blur.
0 Disabled, 1 Enabled |
pp_motionblur 0 |
| pp_sobel_outline | Sobel edge light effect.
0 Disabled, 1 Enabled |
pp_sobel_outline |
| pregame_start_run | This console command will start the execution of the previous game. | pregame_start_run |
| print_local_users | This command is used to print all local users. | print_local_users |
| print_stats | This console command will print the user’s current statistics. | print_stats |
| quit | This command is used to exit the game. | quit |
| r_foliagewind | This command helps you to choose for wind on foliage. | r_foliagewind |
| r_lod_bias | Level of Detail bias (LOD). | r_lod_bias |
| r_lod_max | This command is used to limit the LOD level to the maximum value. | r_lod_max |
| r_shadows | This console command is used to set the shadow quality. | r_shadows |
| r_softparticles | This is a command that deactivates or activates the soft particles. | r_softparticles |
| remove_all_local_users | This console command will delete all local users. | remove_all_local_users |
| resolution | You can change the resolution of the game window with the help of this console command. | resolution 1920x1080x60 |
| resolution_list | This command is used to list all possible resolutions compatible with the current screen. | resolution_list |
| resolution_scale | This console command is used to scale the resolution of non-functional game windows. | resolution_scale 1 |
| rule_show_items | This command will enable voting on the pre-game rule points. | rule_show_items |
| rules_dump | This will cause all information regarding the rules of the game to disappear. | rules_dump |
| run_end | This console command is used to end the execution of the current game. | run_end |
| run_print_seed | You can print the current run seed. | run_print_seed |
| run_print_unlockables | This console will print all the unlockables present in the current run of the game. | run_print_unlockables |
| run_scene_override | Cancels the scene to enter execution. | run_scene_override |
| say | This command is used to send a text or chat message. | say |
| scene_list | This will display all available scenes. | scene_list |
| set_scene | With this command you can set or change the scene. | set_scene |
| set_vstr | This command helps you set the vstr to the specified value. | set_vstr |
| shadow_cascades | Number of cascades used. | shadow_cascades |
| volume_master | Tune the main volume of the game. | volume_master |
| volume_msx | This console command adjusts the volume of the game music. | volume_msx |
| volume_sfx | This command is used to adjust the volume of the game sound effects. | volume_sfx |
| vsync_count | Displays the vsync count. | vsync_count |
| wait_ms | Difference between each frame. | wait_ms |
| window_mode | Puts the screen in windowed mode. | window_mode |
| wwise_log_enabled | This command is used to activate Wwise registration. | wwise_log_enabled |
| user_profile_delete | This command will delete an existing single user profile. | user_profile_delete |
| user_profile_main | This console command is used to display the main profile of the current user. | user_profile_main |
| user_profile_save | This command will save the progress of the user’s profile in a slot | user_profile_save |
| vfxbudget_particle_cost_bias | Default 0 | vfxbudget_particle_cost_bias |
| viewables_list | This command is used to display the entire list of all element names. | viewables_list |
| timer_resolution | The resolution of the Windows timer. | timer_resolution |
| timescale | This command is used to set the time scale of each set. | timescale |
| timestep | This command is used to set the time step of each set. | timestep |
| transition_command | This will fade out and execute the command. | transition_command |
| user_profile_copy | This command is used to copy the user’s profile name to another slot. | user_profile_copy |
| shadow_distance | This command is used to obtain the length or distance of the shadow. | shadow_distance |
| shadow_resolution | You can select the shadow resolution with this console command. | shadow_resolution |
| stage1_pod | Use the pitcher in the first stage. | stage1_pod |
| steam_id | This command will display your Steam ID. | steam_id |
| steam_lobby_copy_to_clipboard | Copy active Steam Lobby to clipboard | steam_lobby_copy_to_clipboard |
| steam_lobby_id | Displays the ID of the current loby in Steam. | steam_lobby_id |
| steam_lobby_invite | Invite the player to your current game. | steam_lobby_invite 1234567899876543 |
| steam_lobby_open_invite_overlay | This console command will open the Steam lobby overlay to the friend invitation menu. | steam_lobby_open_invite_overlay |
| steam_lobby_print_data | You can print all current lobby data using this command. | steam_lobby_print_data |
| steam_lobby_print_list | This command will print the list of lobbies of the previous moves. | steam_lobby_print_list |
| steam_lobby_print_members | This command is used to display the entire list of current members present in the lobby. | steam_lobby_print_members |
| steam_lobby_update_player_count | This command forces the update in the lobby for the players. | steam_lobby_update_player_count |
| count.steam_remote_storage_list_files | This command is used to list all files in the Steam remote storage. | count.steam_remote_storage_list_files |
| sv_listen | The server will accept connections from other players. | sv_listen |
| sv_maxplayers | This console command is used to set the maximum number of players in a lobby. | sv_maxplayers |
| sync_physics | This command activates the automatic synchronization of physics between movements. | sync_physics |
| test_splitscreen | Log in and create a split screen according to users. | test_splitscreen |
Get Risk of Rain 2 Server Hosting now!
#Gameserver
#Risk of rain 2
#top10
#Wiki
12/1/2022
Hol dir jetzt deinen eigenen Gameserver.
Gameserver bestellen
v1.30.0-168-g6f64a707
© 2025 marbis GmbH. Alle Rechte vorbehalten. Alle Preise sind Endpreise inkl. gesetzlicher Umsatzsteuer.